Steel Design Sheet 33
-
1) Question.
For a beam in equilibrium, the moment of resistance is
Answer. -
2) Question.
A rectangular beam of width 200 mm and depth 300 mm is subjected to a shear force of 200 kN. The maximum shear stress produced in the beam is
Answer. -
3) Question.
A symmetrical channel section is made of a material which is equally strong in tension and compression. It is used as a simply supported beam with its web horizontal to carry vertical loads. It will be
Answer. -
4) Question.
The large deflections in beam
Answer. -
5) Question.
The torsional restraint can be provided by providing
Answer. -
6) Question.
The effective length (l) of a simply supported beam with ends restrained against torsion and the end of compression flange fully restrained against lateral bending, is equal to
[Where, L= Span of beam]
Answer. -
7) Question.
The effective length (l) for cantilever beams built-in at the support with projecting length L and free at the end is equal to
Answer. -
8) Question.
The effective length (l) for cantilever beams continuous at the support with projecting length L, partially restrained against torsion at the support and free at the end, is equal to
Answer. -
9) Question.
After 28 days, the cube strength of a grillage beam should not be less than
Answer. -
10) Question.
In the above question, maximum shear force is equal to
Answer.
