Steel Design Sheet 4
-
1) Question.
The maximum slenderness ratio od a steel column, the design of which is governed by wind or seismic force is
Answer. -
2) Question.
The effective length of a battened strut effectively held in position at both ends but not restrained in direction is taken as
Answer. -
3) Question.
According to Is specification the maximum pitch of rivets in compression
Answer. -
4) Question.
For a standard 45 dgree fillet, the ratio of size of fillet to throat thickness is-
Answer. -
5) Question.
The effective length of a fillet weld should not be less than
Answer. -
6) Question.
If the thickness of thinnest outside plate is 12 mm , then the maximum pitch of rivets in tension will be taken as
Answer. -
7) Question.
In a gusseted base, when the end of the column is machined for complete bearing on the base plate, then the axial load is assumed to be transferred to base plate
Answer. -
8) Question.
Efficiency of a riveted joint, having the minimum pitch as per IS:800, is
Answer. -
9) Question.
If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be
Answer. -
10) Question.
When the axis of the load lies in the plane of rivet group, then the rivets are subjected to
Answer.
