Surveying 3
-
1) Question.
If "Fore bearing" of a line is S 49° 52' E (assuming there is no local attraction), the "Back bearing" of the line will be
Answer. -
2) Question.
It is required to produce a smal- scale map of an area in a magnetic zone by directly plotting and checking the work in the field itself. Which one of the following surveys will be most appropriate for this purpose?
Answer. -
3) Question.
An angle measuring instrument reading upto one-sixth of a degree on a main scale is equipped with a vernier having 19 main scale divisions divided into 20 parts. The correct least count for the instrument is
Answer. -
4) Question.
While measuring horizontal angles by the method of repitition with a theodolite readings are taken on both the verniers. Which of the following errors will be eliminated by reading both the verniers?
Answer. -
5) Question.
Agonic line is the line joining points having
Answer. -
6) Question.
The maximum value of centrifugal ratio on roads and railways respectively are taken as
Answer. -
7) Question.
Read the following two statements and select the correct answer.
i) shift bisects the transition curve
ii) transition curve bisects the shift
Answer. -
8) Question.
The difference in elevation of points between a vertical and a tangent is
Answer. -
9) Question.
If an upgrade of 1.5% is followed by a downgrade of 0.5% and rate of change of grade is 0.2% for 20m chain, then the length of vertical curve is
Answer. -
10) Question.
If L is the length of transition curve and R is the radius of circular curve, then the shift of the curve is directly proportionate to
Answer.
